Selection reference
| Component | Function | When to specify it |
|---|---|---|
| Cable feed box | Receives cables and supplies the run | The incoming connection uses cables |
| Connector with feed box | Joins busway to the feed box | The connector plate must match the box |
| Panel connector | Interface with a switchboard | A direct equipment connection is specified |
| Tap-off unit | Supplies an outgoing load | You need a branch from the run |
Source: LVA manual §5.10–5.11; Data Pro manual §5.3–5.4.
Coordinate the final interface and dimensions with the equipment and site survey.
More suitable if…
It is more suitable if you need to retain an incoming cable link while using busway for downstream distribution.
Not ideal if…
It is not ideal if a direct switchboard connection is practical and the extra box only adds volume and connections; compare the interfaces first.
Frequently asked questions
Does cable tap box always mean an incoming feed box?
No; specify whether cables supply the run or leave it to feed a load.
What information should you send?
Model, rated current, voltage, conductors, cable and terminal details, equipment drawing, orientation and environment.
Is the box universal?
No; the connector plate and box must match the selected interface and model.
Can Data Pro be fed by cable?
Yes; its manual describes a cable feed box with or without a touchscreen.
From drawing to estimate
A defined transition avoids site modifications and keeps cables only where their flexibility adds value.